TALION BLX Radio Controlled Car
SCALE
1/8
MAX SPEED POSSIBLE
70+mph / 112+km/h
POWER TYPE
Brushless
BUILD STATUS
RTR
Saleable Part #
ARA106048
Horizon Hobby Saleable Part #
ARA106048
BUILD CONFIGURATION OPTIONS
Mid Motor
DRIVE TYPE
4WD
VEHICLE TYPE
Speed Truggy
SURFACE
Off-road
LENGTH
550mm / 21.65"
WHEELBASE
378mm / 14.88"
RIDE HEIGHT
45mm / 1.77"
FRONT WIDTH
418mm / 16.46"
REAR WIDTH
415mm / 16.34"
HEIGHT
180mm / 7.09"
NUMBER OF DIFFERENTIALS
3
WEIGHT (NO BATTERY)
4.19kg / 9lbs 4oz
BATTERY RECOMMENDATIONS
4S or 6S Lipo (Hard or soft-case) within dimensions 158 x 48 x 70mm or 6.22 x 1.89 x 2.76 inches
WARRANTY LEVEL
2 Year Limited
Image 1 of 33
Designed FAST. At the heart of the TALION is the ARRMA 6S BLX185 brushless system that provides brutal asphalt-ripping power and blistering 70+mph top speeds.
Image 2 of 33
Head turning looks. The TALION 6S BLX looks even better up-close and personal with great attention to detail on the decal and body aesthetics.
Image 3 of 33
Designed TOUGH. With track-inspired handling and tough bashing build quality, the TALION 6S BLX will put you in control of exhilarating RC driving action, straight from the box. Rip-up your local dirt bowl or blast across the mall parking lot; whatever your chosen bash spot, the TALION 6S BLX can do it all.
Image 4 of 33
The TALION 6S BLX has been designed to be fast whatever the terrain. It is a high-speed street ripper and dirt-flinging off-road beast all-in-one!
Image 5 of 33
Standing out from the crowd is easy when you pilot the TALION 6S BLX. A finely detailed pre-painted body provides increased protection against the elements. Steel driveshafts, durable composite suspension arms and hubs make your journey into wild locations even easier.
Image 6 of 33
Don't just bash. BLAST. With awesome 6S brushless power you are assured to have a blast with the TALION 6S BLX.
Image 7 of 33
Your TALION 6S BLX can blast through mud, water and dirt thanks to its waterproof electronics and sealed radio box.
Image 8 of 33
Highly-detailed decals are pre-applied to a top-quality bodyshell. The TALION 6S BLX looks good from whichever angle you admire it.
Image 9 of 33
A low-drag rear wing suspended on lowered wing mounts provides the stability required to pilot the TALION 6S BLX at 70+mph speeds, no matter what the terrain.
Image 10 of 33
With a 3mm thick anodized aluminum chassis, a strong center brace, three full-metal geared differentials, beefy suspension components and steel driveshafts throughout, the TALION 6S BLX is ready for whatever you can throw at it.
Image 11 of 33
The TALION 6S BLX features proven ARRMA designed tough parts.
The battery mount system features two hook-and-loop straps fitted perpendicular to each other to provide a secure fit for your battery packs.
The battery mount system features two hook-and-loop straps fitted perpendicular to each other to provide a secure fit for your battery packs.
Image 12 of 33
Soaking-up a wide range of surfaces is made easy with the included red anodized adjustable shocks. Factory set to handle everything from fast speed runs to snow and mud chucking, no matter where you choose to bash, these high-quality units will keep you stable and in-control. Shock cap protectors fitted to the TALION 6S BLX prevent shock cap damage during upside-down moments.
Image 13 of 33
The center section of the TALION 6S BLX features a molded composite roll hoop. This supports the body from underneath, increasing the durability of the body during upside down action.
Image 14 of 33
A center brace adds longitudinal support to the chassis plate for maximum durability. This is attached to specifically designed mount at the front of the vehicle.
Image 15 of 33
The center brace is securely attached to a specifically designed mount at the rear structure of the vehicle.
Image 16 of 33
The TALION 6S BLX now features a never-loose aluminum servo saver. With no adjustment nut to loosen, this design offers a fit-and-forget setting for the servo saver.
Image 17 of 33
A sliding motor mount is included. This is precision manufactured from high-quality aluminum and anodized in ARRMA red. The sliding motor mount allows the motor position to be adjusted with the loosening of two screws that are accessed from above, significantly simplifying adjustment of the gear mesh and pinion changes.
Image 18 of 33
Never-pop pivot ball joints keep the steering links attached to your TALION 6S BLX however manic the action gets.
Image 19 of 33
The TALION 6S BLX has new designed hub nuts that feature an integrated o-ring that keeps them in position.
Image 20 of 33
For ease of maintenance the TALION 6S BLX now features an easy-access center differential and sliding motor mount.
The motor can be taken out by removing two screws. The center differential can be taken out by removing five screws.
The motor can be taken out by removing two screws. The center differential can be taken out by removing five screws.
Image 21 of 33
High quality dBoots KATAR 6S low-profile tires, coupled with large-diameter aero wheels, offer assured stability at 70+mph speeds on a multitude of surfaces.
The KATAR tread pattern is designed for ultimate forward traction, propelling the TALION 6S BLX to incredible speeds.
The KATAR tread pattern is designed for ultimate forward traction, propelling the TALION 6S BLX to incredible speeds.
Image 22 of 33
Equipped with three metal-geared differential units, as standard, ARRMA understand the importance of durability and control. Easy-access front and rear diff units will allow you to carry-out maintenance in minutes. This means you spend less time wrenching, so you can have more time bashing.
Image 23 of 33
The included BLX185 150A waterproof ESC provides consistent power control and is 6S LiPo ready.
Fitted with reliable IC5 connectors and sporting a built-in cooling fan for reduced heat during intense driving action, the BLX185 ESC has over-voltage protection, and a two-stage LiPo cut off for added cell management.
The fitted 10AWG high-quality wires and 6V BEC unit are combined with a three-mode throttle profile (FWD/REVERSE/BRAKE) to provide the ultimate driving experience.
Recommended battery specification: 5000mAh - 35C minimum - per battery pack
Fitted with reliable IC5 connectors and sporting a built-in cooling fan for reduced heat during intense driving action, the BLX185 ESC has over-voltage protection, and a two-stage LiPo cut off for added cell management.
The fitted 10AWG high-quality wires and 6V BEC unit are combined with a three-mode throttle profile (FWD/REVERSE/BRAKE) to provide the ultimate driving experience.
Recommended battery specification: 5000mAh - 35C minimum - per battery pack
Image 24 of 33
The BLX 2050kV brushless motor provides speed and torque and is perfectly balanced for use with the BLX185 ESC unit.
A beautifully etched black aluminum motor can provides a premium look, whilst a four-pole internal configuration keeps the power supply smooth and consistent.
Gold bullet connectors allow fast and easy wire removal when you need to clean your vehicle.
The aluminum motor can offers increased heat dissipation from the finned body section.
A dual motor shaft flat section provides safe and secure pinion gear fit.
A beautifully etched black aluminum motor can provides a premium look, whilst a four-pole internal configuration keeps the power supply smooth and consistent.
Gold bullet connectors allow fast and easy wire removal when you need to clean your vehicle.
The aluminum motor can offers increased heat dissipation from the finned body section.
A dual motor shaft flat section provides safe and secure pinion gear fit.
Image 25 of 33
The Spektrum STX2 radio system offers fast and consistent control for your ARRMA vehicle. Using 2.4Ghz technology, your ARRMA vehicle is controlled by a wheel and trigger style radio transmitter.
Ideal for new RC users and experienced bashing fans alike. Adjustable steering and throttle trim will allow you to easily tune your control experience to suit your individual needs.
Ideal for new RC users and experienced bashing fans alike. Adjustable steering and throttle trim will allow you to easily tune your control experience to suit your individual needs.
Image 26 of 33
IC5 connectors can handle the power required when the action gets furious. They provide a reliable connection between your ESC and your chosen battery packs.
Image 27 of 33
The ADS-15M steering servo benefits from metal gears and is fully waterproof.
To provide fast and consistent steering response, the ADS-15M has 208oz-inch (15kg-cm) of torque at 7.2v.
At 1.6 x 0.8 x 1.5" (41 x 20 x 38mm) in size, this high-power steering servo is compact and highly capable.
To provide fast and consistent steering response, the ADS-15M has 208oz-inch (15kg-cm) of torque at 7.2v.
At 1.6 x 0.8 x 1.5" (41 x 20 x 38mm) in size, this high-power steering servo is compact and highly capable.
Image 28 of 33
Designed to be FAST, designed to be TOUGH. ARRMA want you to progress your RC experience by accessing more speed, resulting in enhanced performance.
With a high-speed option pinion included in the box, you can realize the inbuilt potential of your ARRMA vehicle; increasing your performance has never been easier. Follow our dedicated Speed Card information to better understand how you can keep getting faster.
With a high-speed option pinion included in the box, you can realize the inbuilt potential of your ARRMA vehicle; increasing your performance has never been easier. Follow our dedicated Speed Card information to better understand how you can keep getting faster.
Image 29 of 33
A high-quality 2.4Ghz radio transmitter and receiver, wheels and high-performance dBoots tires, waterproof ESC and steering servo and a pre-painted bodyshell are all included, as standard.
Please check the vehicle specifications for exact details of what is included in the box and what is required to get your ARRMA vehicle running.
Please check the vehicle specifications for exact details of what is included in the box and what is required to get your ARRMA vehicle running.
Image 30 of 33
Fully waterproof ESC, steering servo and radio receiver box are standard. This means that hitting the roughest terrains, in the most extreme conditions, will be no problem. Rain, mud, snow, dirt and anything else you want to bash your way through.
ARRMA waterproof electronics are ready for action.
* For details on waterproof standards, please refer to the product instruction manuals
ARRMA waterproof electronics are ready for action.
* For details on waterproof standards, please refer to the product instruction manuals
Image 31 of 33
ARRMA will support your investment for two years. With our impressive limited warranty helping to keep you running for longer.
Visit our Support page to learn more about this great feature.
Visit our Support page to learn more about this great feature.
