The first Extreme Bash vehicle to be supplied ready to run, the ARRMA® TALION™ 6S 1/8 4WD Extreme Bash Speed Truggy is the highest spec, fastest, toughest, and most capable 6S off road RTR from ARRMA® to date.
Supplied ready to run with high-quality Spektrum™ electronics that feature Active Vehicle Control® and Smart technologies, combined with a powerful 6S LiPo capable brushless ESC and motor. This ready to run EXB vehicle offers outstanding performance in a package that is incredible value for money.
“Designed Fast, Designed Tough” may be an understatement when describing the TALION™ 6S BLX Extreme Bash Speed Truggy. Made of strong anodized 7075 T6 aluminum, the laser-etched chassis plate gains further rigidity from front and rear aluminum chassis braces. Strong composite chassis side pods, along with a center body support and brace, provide even more rugged resilience.
The ARRMA® TALION™ 6S 1/8 4WD Extreme Bash Speed Truggy adds extra toughness everywhere it counts, making this 1/8 scale chassis an ideal vehicle for high-speed bashing over brutal terrain. EXtreme Bash (EXB) hardened components are utilized throughout the fully assembled chassis to give the 1/8 scale TALION™ 6S 4WD BLX 1/8 EXtreme Bash Speed Truggy RTR virtually unstoppable strength.
The streamlined profile of the TALION™ 6S 1/8 4WD Extreme Bash Speed Truggy maximizes the speed potential of the 6S-capable brushless power system’s Spektrum™ Firma™ 4074 2050Kv Brushless Motor. With its DX3™ DSMR® 2.4GHz radio system, SR6110AT receiver, and Firma™ 150A ESC, this model also provides the benefits of Spektrum™ AVC® (Active Vehicle Control®) and Smart technologies straight out of the box, blasting to 70mph+ top speeds.
The tough ARRMA® 6S platform lets you bash at high speeds in almost any environment — off-road, on dirt and grass, on parking lots and over paved and asphalt surfaces.
ARRMA® vehicles are Designed Fast, Designed Tough, however we appreciate that you may want to take things to the extreme!
ARRMA® EXtreme Bash (EXB) models feature EXB parts that are made from extremely strong and durable materials and engineered to survive the most grueling action.
The TALION™ 6S 1/8 4WD Extreme Bash Speed Truggy is built with over US$500* of ARRMA® Extreme Bash parts.
*when purchased separately
The TALION™ 6S 1/8 4WD Extreme Bash Speed Truggy is assembled around a tough EXB chassis plate made of high-strength 7075-T6 aluminum. The chassis is anodized black, and laser etched with exclusive ARRMA EXB graphics.
Adjustable coil-over-oil shock absorbers are mounted on strong 7075-T6 red anodized aluminum front and rear shock towers.
The suspension of the TALION™ 6S 1/8 4WD Extreme Bash Speed Truggy has been designed to give a streamlined profile to maximizes the speed potential of the 6S-capable brushless power system.
The TALION™ 6S 1/8 4WD Extreme Bash Speed Truggy is the first off-road RTR to be supplied with belted tires as standard. The dBoots® KATAR tires have a strong woven belt molded-in to the carcass that eliminates ballooning of the tire at high speed. This results in improved traction and added control.
EXB red anodized chassis braces at the front and rear of the TALION™ 6S 1/8 4WD Extreme Bash Speed Truggy add even more toughness to the chassis structure.
An EXB aluminum servo mount increases the structural stiffness between the servo and the chassis, increasing the steering response of the model.
An EXB exclusive extra-hard servo saver spring further enhances the direct feel of the steering.
Strong steel upper front suspension arm hinge-pins have a smooth surface to reduce friction and add to the plush action of the front suspension.
The EXB steering rack is CNC machined from high-strength 7075-T6 aluminum. It is anodized ARRMA® red and sports the EXB logo for added visual appeal.
The differentials included with this model have been engineered for huge power-handling and strength. The external gears of the front and rear differentials have a wide tooth profile and increased helix angle resulting in more durability.
The internal gears of the differentials have also been engineered for increased strength.
The front, rear and center differentials are a limited-slip design. This set-up ensures that power is sent to the tires with traction, giving you ultimate power delivery.
Topping-off the TALION™ 6S 1/8 4WD Extreme Bash Speed Truggy is the exclusive EXB matte and gloss finish body. Body aesthetics are enhanced by highly detailed decals that are pre-applied to the top-quality bodyshell.
A wide front bumper offers protection to the front of the body and the front shock absorbers enabling you to send it large with confidence. The upper mount for the bumper has been designed with a spring action to help absorb impacts.
The wide bumper features an integrated skid plate that is made from tough, durable material and provides protection to the front end of the chassis plate for when the action gets wild.
EXB steel turnbuckles are used to add strength and durability to the front and rear of the TALION™ 6S 1/8 4WD Extreme Bash Speed Truggy.
The front suspension has been fortified by the ARRMA® engineers. The upper and lower suspension arms are beefed-up and red anodized aluminum strengthening caps added to the lower suspension arms.
Heavy-duty steel pins provide a secure connection between the suspension arms and the heavy-duty shock rod-ends.
Just like the front suspension, the rear suspension has added beef. These heavy-duty arms have been engineered with added strength and durability.
The rear suspension is attached to the chassis with strong steel hangers, further enhancing the toughness of this vehicle.
ARRMA® Safe-D system. The input gear and drive cup key together, ensuring you still have drive in the event of the attachment screw loosening.
The screw holding the drive cup to the input gear is held in place in the molded composite sleeve. No more relying on thread lock to keep this assembly together.
Also receiving the ARRMA® Safe-D treatment is the pinion and motor shaft assembly. The Spektrum™ 4074 2050Kv motor features a 5mm shaft with a groove that accepts a pinion retaining e-clip. The included stock and optional speed pinions are ARRMA® Safe-D design that is keyed to the motor shaft by using a D-shaped hole. These design features assist with retention of the pinion gear should the set screw loosen.
A low-drag rear wing suspended on lowered wing mounts provides the stability required to pilot the TALION™ 6S 1/8 4WD Extreme Bash Speed Truggy at 70+mph speeds, no matter what the terrain.
The included Spektrum™ Firma™ 150 waterproof ESC provides consistent power control and is 6S LiPo ready.
Fitted with reliable IC5 connectors and sporting a built-in cooling fan for reduced heat during intense driving action, the Spektrum™ Firma™ 150 ESC has over-voltage protection, and a two-stage LiPo cut off for added cell management.
The fitted 10AWG high-quality wires and 7.4V BEC unit are combined with a three-mode throttle profile (FWD/REVERSE/BRAKE) to provide the ultimate driving experience.
The Spektrum™ Firma™ 4074 2050kV brushless motor provides speed and torque and is perfectly balanced for use with the Spektrum™ Firma™ 150 ESC unit.
A beautifully etched black aluminum motor can provides a premium look, whilst a four-pole internal configuration keeps the power supply smooth and consistent.
Gold bullet connectors allow fast and easy wire removal when you need to clean your vehicle.
The aluminum motor can offers increased heat dissipation.
A black anodized aluminum motor heatsink is fitted to the Spektrum™ motor to provide additional cooling when the action heats up.
The Spektrum™ S652 Digital Steering Servo will provide fast and consistent steering response on the most demanding surfaces.
A waterproof servo case will keep your ARRMA® vehicle handling correctly, even when the action gets wet.
With 19.08kg (265oz) of torque at 7.4v, this Spektrum™ S652 Digital Steering Servo has huge amounts of torque, 32% more than the ADS-15M servo.
Take control with the included Spektrum™ DX3 transmitter. This transmitter is built around frequency-agile, DSMR 2.4GHz technology.
Teamed with the SR6110AT receiver you get stability control of AVC™ (Active Vehicle Control) technology in your vehicle. AVC technology creates a more enjoyable driving experience by managing the vehicle's driving characteristics and attitude.
For more information on the features of the DX3 please see the Spektrum™ website:
IC5 connectors can handle the power required when the action gets furious. They provide a reliable connection between your ESC and your chosen battery packs.
A full complement of high-quality rubber shielded bearings for enhanced protection against the elements. Keeping dirt, water, and dust out and lubrication in means more time bashing and less time wrenching.
Designed to be FAST, designed to be TOUGH. ARRMA want you to progress your RC experience by accessing more speed, resulting in enhanced performance.
With a high-speed option pinion included in the box, you can realize the inbuilt potential of your ARRMA vehicle, increasing your performance has never been easier. Follow our dedicated Speed Card information to better understand how you can keep getting faster.
Fully waterproof ESC, steering servo and radio receiver box are standard. This means that hitting the roughest terrains, in the most extreme conditions, will be no problem. Rain, mud, snow, dirt and anything else you want to bash your way through.
The included waterproof electronics are ready for action.
* For details on waterproof standards, please refer to the product instruction manuals
A high-quality 2.4Ghz radio transmitter and receiver, wheels and high-performance dBoots® tires, waterproof ESC and steering servo and a pre-painted bodyshell are all included, as standard.
Please check the vehicle specifications for exact details of what is included in the box and what is required to get your ARRMA® vehicle running.
ARRMA® will support your investment for two years. With our impressive, limited warranty helping to keep you running for longer.
Visit our Support page to learn more about this great feature.