MOJAVE BLX Radio Controlled Car
SCALE
1/7
MAX SPEED POSSIBLE
60+mph / 96+km/h
POWER TYPE
Brushless
BUILD STATUS
RTR
Saleable Part #
ARA106058T1
Horizon Hobby Saleable Part #
ARA106058T1
BUILD CONFIGURATION OPTIONS
Mid Motor
DRIVE TYPE
4WD
VEHICLE TYPE
Desert Truck
SURFACE
Off-road
LENGTH
715mm / 28.15"
WHEELBASE
420mm / 16.54"
RIDE HEIGHT
47mm / 1.85"
FRONT WIDTH
355mm / 13.98"
REAR WIDTH
355mm / 13.98"
HEIGHT
269mm / 10.59"
NUMBER OF DIFFERENTIALS
3
WEIGHT (NO BATTERY)
5.4kg / 11lbs 14oz
BATTERY RECOMMENDATIONS
4S or 6S Lipo (Hard or soft-case) within dimensions 158 x 48 x 70mm or 6.22 x 1.89 x 2.76 inches
WARRANTY LEVEL
2 Year Limited
Image 1 of 34
ARRMA Super-Duty strength and power teamed with awesome scale styling. Intimidating 1/7th Scale size. BLX 6S brushless power system and waterproof electronics as standard. This is one serious machine. This is the MOJAVE 6S BLX Desert Truck.
Image 2 of 34
Scale Desert Truck looks. The MOJAVE 6S BLX looks even better up-close and personal with great attention to detail on the decal and body aesthetics. Detailed interior cockpit details and body colored roll cage, roof rails and wheels add to the scale realism.
Image 3 of 34
Designed FAST. At the heart of the MOJAVE 6S BLX is the ARRMA 6S 185 BLX brushless system that provides brutal power and blistering top speed.
Image 4 of 34
Designed BIG. The monstrous MOJAVE 6S BLX 1/7th Scale Desert Truck towers over conventional 1/10th Short Course Trucks.
Image 5 of 34
Commanding any surface is simple when you pilot the MOJAVE 6S BLX. Battle-hardened to withstand a diverse range of environments, this all-terrain beast will take your breath away, time-after-time.
Image 6 of 34
Available in two stunning trim schemes. Choose from either florescent green or bright red. Each of these MOJAVE 6S BLX Desert Trucks is equipped with matching roll cage, roof rails and wheels. You decide.
Image 7 of 34
Don't just bash. BLAST. With awesome 6S BLX brushless power and bash-tuned four-wheel independent suspension you are assured to have a blast with the MOJAVE 6S BLX.
Image 9 of 34
Designed TOUGH. With a 3mm thick anodized aluminum chassis, full-length aluminum chassis brace, three full-metal geared differentials, strong suspension components and steel driveshafts throughout, the MOJAVE 6S BLX is ready for whatever you can throw it at.
Image 10 of 34
Nerf bars are fitted to the side guards to add support to the body and protect the chassis from side-impacts. Hook and loop tape is used between the nerf bars and the body to prevent unwanted body vibration.
The battery mount system features two hook-and-loop straps fitted perpendicular to each other to provide a secure fit for your battery packs. The center roll hoop is designed to integrate with the body roll cage to add support to the body.
The battery mount system features two hook-and-loop straps fitted perpendicular to each other to provide a secure fit for your battery packs. The center roll hoop is designed to integrate with the body roll cage to add support to the body.
Image 11 of 34
The body assembly of the MOJAVE 6S BLX incorporates the molded cockpit and roll cage. To add structure and strength to the body the roll cage interfaces with the roll hoop on the chassis.
The body, cockpit and roll cage are removed as one unit with the removal of just four body clips, making it quick and simple to change your batteries or perform maintenance on your vehicle.
The body, cockpit and roll cage are removed as one unit with the removal of just four body clips, making it quick and simple to change your batteries or perform maintenance on your vehicle.
Image 12 of 34
Eating-up a wide range of surfaces is made easy with the included red anodized adjustable shocks linked to four-wheel independent suspension. Factory set to handle everything from fast speed runs to snow and mud chucking, no matter where you choose to bash, these high-quality units will keep you stable and in-control.
Image 13 of 34
A tough front bumper is suspended by a durable front skid plate, shrugging off impacts to the front of the vehicle. A flexible front bumper valance is suspended from the front bumper enhancing the looks and durability of the MOJAVE 6S BLX.
Image 14 of 34
At the rear of the MOJAVE 6S BLX there is a realistic looking rear bumper suspended by durable rear skid plate.
Image 15 of 34
The body mounts on the MOJAVE 6S BLX model are suspended from four posts at the front and rear of the chassis for increased durability. They have been engineered to absorb impacts, prolonging the life of the body shell and the body mount.
Specifically cut foam pads sit between the body mount and the body to protect the body and reduce body vibration.
The front and rear upper bumper supports have also been engineered to absorb impacts.
Specifically cut foam pads sit between the body mount and the body to protect the body and reduce body vibration.
The front and rear upper bumper supports have also been engineered to absorb impacts.
Image 16 of 34
The front suspension of the MOJAVE 6S BLX features heavy duty suspension arms that are strengthened further with red anodized aluminum strengthening caps.
Image 17 of 34
Never-pop pivot ball joints keep the steering links attached to your vehicle however manic the action gets.
Image 18 of 34
The breathtaking MOJAVE 6S BLX paint schemes are highly detailed and features a multi-finish body with both gloss and matte finishes.
ARRMA body clip retainers are fitted as standard to ensure you don't misplace your body clips.
ARRMA body clip retainers are fitted as standard to ensure you don't misplace your body clips.
Image 19 of 34
The MOJAVE 6S BLX model features added realism with a molded cockpit with driver and co-driver figures, detailed cockpit decals and a body color specific molded roll cage and roof rails.
Image 20 of 34
Highly detailed decals are pre-applied to the beautifully detailed bodyshell. The MOJAVE 6S BLX reveals more and more detail the closer you look.
Image 21 of 34
Aggressive and hard-wearing dBoots FORTRESS all-terrain tires are mounted on strong nylon split spoke wheels, giving you the ground-ripping traction you need to put the BLX brushless power straight onto your chosen surface. 17mm wheel hex fittings give tough, dependable power transfer.
Image 22 of 34
A sliding motor mount is included. This is precision manufactured from high-quality aluminum and anodized in ARRMA red. The sliding motor mount allows the motor position to be adjusted with the loosening of two screws that are accessed from above, significantly simplifying adjustment of the gear mesh and pinion changes.
Image 23 of 34
Equipped with three metal-geared differential units, as standard, ARRMA understand the importance of durability and control. Easy-access front and rear diff units will allow you to carry-out maintenance in minutes. This means you spend less time wrenching, so you can have more time bashing.
Image 24 of 34
The included BLX185 150A waterproof ESC provides consistent power control and is 6S LiPo ready.
Fitted with reliable IC5 connectors and sporting a built-in cooling fan for reduced heat during intense driving action, the BLX185 ESC has over-voltage protection, and a two-stage LiPo cut off for added cell management.
The fitted 10AWG high-quality wires and 6V BEC unit are combined with a three-mode throttle profile (FWD/REVERSE/BRAKE) to provide the ultimate driving experience.
Recommended battery specification: 5000mAh - 35C minimum - per battery pack
Fitted with reliable IC5 connectors and sporting a built-in cooling fan for reduced heat during intense driving action, the BLX185 ESC has over-voltage protection, and a two-stage LiPo cut off for added cell management.
The fitted 10AWG high-quality wires and 6V BEC unit are combined with a three-mode throttle profile (FWD/REVERSE/BRAKE) to provide the ultimate driving experience.
Recommended battery specification: 5000mAh - 35C minimum - per battery pack
Image 25 of 34
The BLX 2050kV brushless motor provides speed and torque and is perfectly balanced for use with the BLX185 ESC unit.
A beautifully etched black aluminum motor can provides a premium look, whilst a four-pole internal configuration keeps the power supply smooth and consistent.
Gold bullet connectors allow fast and easy wire removal when you need to clean your vehicle.
The aluminum motor can offers increased heat dissipation from the finned body section.
A dual motor shaft flat section provides safe and secure pinion gear fit.
A beautifully etched black aluminum motor can provides a premium look, whilst a four-pole internal configuration keeps the power supply smooth and consistent.
Gold bullet connectors allow fast and easy wire removal when you need to clean your vehicle.
The aluminum motor can offers increased heat dissipation from the finned body section.
A dual motor shaft flat section provides safe and secure pinion gear fit.
Image 26 of 34
The ADS-15M steering servo benefits from metal gears and is fully waterproof.
To provide fast and consistent steering response, the ADS-15M has 208oz-inch (15kg-cm) of torque at 7.2v.
At 1.6 x 0.8 x 1.5" (41 x 20 x 38mm) in size, this high-power steering servo is compact and highly capable.
To provide fast and consistent steering response, the ADS-15M has 208oz-inch (15kg-cm) of torque at 7.2v.
At 1.6 x 0.8 x 1.5" (41 x 20 x 38mm) in size, this high-power steering servo is compact and highly capable.
Image 27 of 34
The Spektrum STX2 radio system offers fast and consistent control for your ARRMA vehicle. Using 2.4Ghz technology, your ARRMA vehicle is controlled by a wheel and trigger style radio transmitter.
Ideal for new RC users and experienced bashing fans alike. Adjustable steering and throttle trim will allow you to easily tune your control experience to suit your individual needs.
Ideal for new RC users and experienced bashing fans alike. Adjustable steering and throttle trim will allow you to easily tune your control experience to suit your individual needs.
Image 28 of 34
IC5 connectors can handle the power required when the action gets furious. They provide a reliable connection between your ESC and your chosen battery packs.
Image 29 of 34
Designed to be FAST, designed to be TOUGH. ARRMA want you to progress your RC experience by accessing more power, resulting in faster performance.
With an easy-to-access upgrade path, you can increase the inbuilt potential of your ARRMA vehicle as your skills develop; increasing your performance has never been easier. Follow our dedicated Speed Card information to better understand how you can keep getting faster.
With an easy-to-access upgrade path, you can increase the inbuilt potential of your ARRMA vehicle as your skills develop; increasing your performance has never been easier. Follow our dedicated Speed Card information to better understand how you can keep getting faster.
Image 30 of 34
A high-quality 2.4Ghz radio transmitter and receiver, wheels and high-performance dBoots tires, waterproof ESC and steering servo and a pre-painted bodyshell are all included, as standard.
Please check the vehicle specifications for exact details of what is included in the box and what is required to get your ARRMA vehicle running.
Please check the vehicle specifications for exact details of what is included in the box and what is required to get your ARRMA vehicle running.
Image 31 of 34
Fully waterproof ESC, steering servo and radio receiver box are standard. This means that hitting the roughest terrains, in the most extreme conditions, will be no problem. Rain, mud, snow, dirt and anything else you want to bash your way through.
ARRMA waterproof electronics are ready for action.
* For details on waterproof standards, please refer to the product instruction manuals
ARRMA waterproof electronics are ready for action.
* For details on waterproof standards, please refer to the product instruction manuals
Image 32 of 34
ARRMA will support your investment for two years. With our impressive limited warranty helping to keep you running for longer.
Visit our Support page to learn more about this great feature.
Visit our Support page to learn more about this great feature.
