INFRACTION BLX Radio Controlled Car
SCALE
1/7
MAX SPEED POSSIBLE
80+mph / 128+km/h
POWER TYPE
Brushless
BUILD STATUS
RTR
Saleable Part #
ARA109001
Horizon Hobby Saleable Part #
ARA109001
BUILD CONFIGURATION OPTIONS
Mid Motor
DRIVE TYPE
4WD
VEHICLE TYPE
Resto-Mod Truck
SURFACE
All-road
LENGTH
695mm / 27.36"
WHEELBASE
406mm / 15.98"
RIDE HEIGHT
15mm / 0.59"
FRONT WIDTH
308mm / 12.13"
REAR WIDTH
305mm / 12.01"
HEIGHT
200mm / 7.87"
NUMBER OF DIFFERENTIALS
3
WEIGHT (NO BATTERY)
4.8kg / 10lbs 9oz
BATTERY RECOMMENDATIONS
4S or 6S Lipo (Hard or soft-case) within dimensions specified
WARRANTY LEVEL
2 Year Limited
Image 1 of 30
Take your truck bashing to the street with the ready-to-run ARRMA INFRACTION 6S BLX 4WD resto-mod truck. It’s the first RC truck of its kind — DESIGNED FAST and DESIGNED TOUGH for hard-hitting action at speeds of 80+ mph with 6S power!
Image 2 of 30
With its 4WD traction, you can run the INFRACTION 6S BLX on all roads, in all conditions — over loose gravel, asphalt, smooth dirt, and short grass, in the sun, rain, and ice.
Image 3 of 30
The INFRACTION 6S BLX offers classic truck looks for street bashing. The body comes factory-finished with a matte bronze camouflage trim and super-detailed decals.
Image 4 of 30
The INFRACTION 6S BLX model is the first model from ARRMA to feature the Spektrum Active Vehicle Control system. This system helps you tame the awesome 6S power when things get loose.
Image 5 of 30
The body comes factory-finished with a matte bronze camouflage trim and decals. It includes a tunable wing so you can customize the downforce to the way you want it.
Image 6 of 30
The body features added roll protection. The roof rails and roll bars that are fitted to the body, reduce scrapes and dents when the action gets extreme.
Image 7 of 30
DESIGNED FAST, DESIGNED TOUGH — underneath the truck body is a 3mm black anodized aluminum chassis with an ARRMA red anodized aluminum center brace to maximize strength.
Image 8 of 30
To aid high-speed stability a rear diffuser increases downforce and grip, enabling you to corner faster and with confidence.
Image 9 of 30
To further enhance the aerodynamics, the chassis includes a full-width front splitter to balance downforce distribution.
A lightweight foam front bumper adds protection and support to the front of the body.
A lightweight foam front bumper adds protection and support to the front of the body.
Image 10 of 30
The INFRACTION 6S BLX features the ARRMA never-loose servo saver which offers a fit-and-forget setting for the servo saver. Proven pivot ball suspension is used at the front of the model.
Image 11 of 30
The electronics module holds the ESC, receiver and servo in one compact package. It is easily removed from the vehicle for fast and efficient servicing.
Image 12 of 30
The center diff module can be removed by taking out just five bolts, making maintenance as fast as the INFRACTION 6S BLX truck itself. A sliding mount allows quick, easy motor access.
Image 13 of 30
Designed to be easy to work on. The front and rear differential units can be quickly removed from the front and rear gearboxes for fast and efficient tuning and servicing.
Image 14 of 30
dBoots Hoons all-road tires are firmly planted for maximum traction. These tires are belted to prevent ballooning at high speeds and mounted on 5-spoke wheels with extra-durable hubs.
Image 15 of 30
16mm Big Bore shocks with coil-over springs are tuned to absorb bumps and jumps from all-road action.
Image 16 of 30
Anodized aluminum parts are used throughout, offering high strength, low weight and awesome looks.
Image 17 of 30
The center section of the model includes an anodized aluminum sliding motor mount and an oil-filled center differential. The center differential has steel internal gears, steel outdrives and a steel spur gear for ultimate durability.
A speed pinion is included for 80mph+ speed passes.
A speed pinion is included for 80mph+ speed passes.
Image 18 of 30
The electronics module features a sealed compartment for housing the receiver. The servo and electronic speed control mount to this module creating a compact assembly that is easily removed from the model for servicing.
Image 19 of 30
Two extra-large battery trays are placed at the rear section of the chassis. These trays have sliding pieces that adjust to the length of your batteries. The batteries are held in tight with two hook and loop straps that are positioned perpendicular to each other.
Each battery tray can accommodate batteries up to 7.09x2.16x2.75" (180x55x70mm)
Each battery tray can accommodate batteries up to 7.09x2.16x2.75" (180x55x70mm)
Image 20 of 30
The included BLX185 150A waterproof ESC provides consistent power control and is 6S LiPo ready.
Fitted with reliable IC5 connectors and sporting a built-in cooling fan for reduced heat during intense driving action, the BLX185 ESC has over-voltage protection, and a two-stage LiPo cut off for added cell management.
The fitted 10AWG high-quality wires and 6V BEC unit are combined with a three-mode throttle profile (FWD/REVERSE/BRAKE) to provide the ultimate driving experience.
Recommended battery specification: 5000mAh - 35C minimum - per battery pack
Fitted with reliable IC5 connectors and sporting a built-in cooling fan for reduced heat during intense driving action, the BLX185 ESC has over-voltage protection, and a two-stage LiPo cut off for added cell management.
The fitted 10AWG high-quality wires and 6V BEC unit are combined with a three-mode throttle profile (FWD/REVERSE/BRAKE) to provide the ultimate driving experience.
Recommended battery specification: 5000mAh - 35C minimum - per battery pack
Image 21 of 30
The BLX 2050kV brushless motor provides speed and torque and is perfectly balanced for use with the BLX185 ESC unit.
A beautifully etched black aluminum motor can provides a premium look, whilst a four-pole internal configuration keeps the power supply smooth and consistent.
Gold bullet connectors allow fast and easy wire removal when you need to clean your vehicle.
The aluminum motor can offers increased heat dissipation from the finned body section.
A dual motor shaft flat section provides safe and secure pinion gear fit.
A beautifully etched black aluminum motor can provides a premium look, whilst a four-pole internal configuration keeps the power supply smooth and consistent.
Gold bullet connectors allow fast and easy wire removal when you need to clean your vehicle.
The aluminum motor can offers increased heat dissipation from the finned body section.
A dual motor shaft flat section provides safe and secure pinion gear fit.
Image 22 of 30
The included Spektrum DX2E ACTIVE transmitter is built around frequency-agile, DSMR 2.4GHz technology.
Teamed with the SRS6000 you get stability control of AVC™ (Active Vehicle Control) technology in your vehicle. AVC technology creates a more enjoyable driving experience by managing the vehicle's driving characteristics and attitude.
Teamed with the SRS6000 you get stability control of AVC™ (Active Vehicle Control) technology in your vehicle. AVC technology creates a more enjoyable driving experience by managing the vehicle's driving characteristics and attitude.
Image 23 of 30
The ADS-15M steering servo benefits from metal gears and is fully waterproof.
To provide fast and consistent steering response, the ADS-15M has 208oz-inch (15kg-cm) of torque at 7.2v.
At 1.6 x 0.8 x 1.5" (41 x 20 x 38mm) in size, this high-power steering servo is compact and highly capable.
To provide fast and consistent steering response, the ADS-15M has 208oz-inch (15kg-cm) of torque at 7.2v.
At 1.6 x 0.8 x 1.5" (41 x 20 x 38mm) in size, this high-power steering servo is compact and highly capable.
Image 24 of 30
IC5 connectors can handle the power required when the action gets furious. They provide a reliable connection between your ESC and your chosen battery packs.
Image 25 of 30
Designed to be FAST, designed to be TOUGH. ARRMA want you to progress your RC experience by accessing more speed, resulting in enhanced performance.
With a high-speed option pinion included in the box, you can realize the inbuilt potential of your ARRMA vehicle; increasing your performance has never been easier. Follow our dedicated Speed Card information to better understand how you can keep getting faster.
With a high-speed option pinion included in the box, you can realize the inbuilt potential of your ARRMA vehicle; increasing your performance has never been easier. Follow our dedicated Speed Card information to better understand how you can keep getting faster.
Image 26 of 30
A high-quality 2.4Ghz radio transmitter and receiver, wheels and high-performance dBoots tires, waterproof ESC and steering servo and a pre-painted bodyshell are all included, as standard.
Please check the vehicle specifications for exact details of what is included in the box and what is required to get your ARRMA vehicle running.
Please check the vehicle specifications for exact details of what is included in the box and what is required to get your ARRMA vehicle running.
Image 27 of 30
Fully waterproof ESC, steering servo and radio receiver box are standard. This means that hitting the roughest terrains, in the most extreme conditions, will be no problem. Rain, mud, snow, dirt and anything else you want to bash your way through.
ARRMA waterproof electronics are ready for action.
* For details on waterproof standards, please refer to the product instruction manuals
ARRMA waterproof electronics are ready for action.
* For details on waterproof standards, please refer to the product instruction manuals
Image 28 of 30
ARRMA will support your investment for two years. With our impressive limited warranty helping to keep you running for longer.
Visit our Support page to learn more about this great feature.
Visit our Support page to learn more about this great feature.
