The GRANITE 4X4 3S BLX is ready to BLAST. Featuring an aggressively styled truck bodyshell that looks even better up-close and personal, with great attention to detail on the decal and body aesthetics.
Built to soak-up the most intense all-weather thrills and spills, the GRANITE 4X4 3S BLX is pumped full of high-quality ARRMA design features, meaning you can conquer anything in your path, and enjoy head-turning Monster Truck looks, that will almost growl if you stare.
The GRANITE 4X4 3S BLX will provide unrivalled traction on any surface, blasting through your chosen environment, as you carve away the landscape with the ground-thrashing motion of full-time 4WD.
ARRMA drivers are always ready for the roughest action; the GRANITE 4X4 3S BLX will relish everything you decide to attack.
Designed to be FAST, designed to be TOUGH, the GRANITE 4x4 3S BLX Monster Truck is primed to blast across any terrain. Ready-to-Run and ready for action, the 3S BLX powered GRANITE 4x4 provides adrenaline pumping RC action, no matter what the conditions.
Precision aluminum, tough steel and composite materials, all combined in an easy-to-maintain vehicle design that is built for action, straight from the box.
High-sides on the moulded composite bathtub chassis ensure the amount of dirt and debris entering the chassis is kept to a minimum.
High-strength hook-and-loop straps are used to keep your batteries in place, whatever the action entails.
With awesome 3S BLX power and superb traction from the dBoots FORTRESS tires, the GRANITE 4X4 3S BLX wheelies for fun. To try and tame the beast, ARRMA have installed an adjustable multi-height wheelie bar, as standard.
Soaking-up a wide range of surfaces is made easy with the included coil-over oil shocks. Factory set to handle everything from fast speed runs to snow and mud chucking, no matter where you choose to bash, these high-quality units will keep you stable and in-control.
The shock absorbers on the GRANITE 4x4 3S BLX feature a keyed spring perch and self-bleed design. These shocks are designed to be simple to maintain yet offer all the performance required to give amazing handling.
Easy-access Electronics Module assembly can be removed from the vehicle with the removal of only five screws. The module offers quick and easy access to the servo, electronic speed controller and receiver.
The two-piece moulding comprises a lower box and upper lid that are sealed with high-quality rubber seals. The ESC and steering servo are attached to this moulding, whilst the receiver sits inside the waterproof box.
Easy-access Power Module assembly can be removed from the vehicle in seconds, with the removal of just one single screw. The center shaft assembly is telescopic to assist with easy disassembly and it is sprung-loaded to ensure it stays in position during use.
Both the front and rear diff modules are easy to access in the GRANITE 4x4 3S BLX, ensuring that you spend more time bashing and less time in the workshop.
Highly detailed decals are pre-applied to the beautifully detailed bodyshell. The GRANITE 4X4 3S BLX models look good from whichever angle you admire them.
High quality dBoots FORTRESS MT tires, coupled with black chrome finish multi-spoke wheels, offer superb bite on a multitude of surfaces.
With the Power Module removed from the vehicle the slipper clutch can be accessed with the removal of three screws. The triple plate slipper clutch in the 3S models features a 0.8 module spur gear making it super-durable in extreme conditions.
These differentials are TOUGH. The main differential gears have been super-sized with large pitch gears that have been designed to withstand huge torques, allowing lightweight composite material to be used for reduced rotating mass without compromising strength. The differential internals feature full-metal straight-cut gears, ensuring trouble-free operation.
The BLX100 100A waterproof ESC provides consistent power control and is 3S LiPo ready.
Fitted with a reliable IC5 battery connector and sporting a built-in cooling fan for reduced heat during intense driving action, the BLX100 ESC has over-voltage protection, and a two-stage LiPo cut-off for added cell management.
The fitted 12AWG high-quality wires and 6.0V BEC unit are combined with a three-mode throttle profile (FWD/REVERSE/BRAKE) to provide the ultimate driving experience.
The BLX 3660 3200kV brushless motor provides both speed and torque and is perfectly balanced for use with our BLX100 ESC unit and 3S LiPo batteries.
A beautifully etched black aluminum motor can provides a premium look, whilst a four-pole internal configuration keeps the power supply smooth and consistent.
Gold bullet connectors allow fast and easy wire removal when you need to clean your vehicle.
An aluminum motor heatsink is fitted to the BLX 3660 motor, as standard. The heatsink features large fins and a flat area that has been designed to enable a fan to be mounted if further motor cooling is required.
Finished in a matte black colour, it is etched with a cool ARRMA logo.
Strong and durable, the waterproof ADS-7M Metal Geared Steering Servo provides fast and reliable control.
The ADS-7M has all-metal gears for increased strength and long-lasting durability. The 40mm x 38mm x 20mm case size is industry standard, so the ADS-7M can also be fitted in other RC vehicles. Operating at 6 kg-cm/6.5 kg-cm 6V/7.2V (83oz-inch/90oz-inch), this tough steering servo can reach full articulation in 0.14 sec/0.12 sec 6V/7.2V.
The Spektrum STX2 radio system offers fast and consistent control for your ARRMA vehicle. Using 2.4Ghz technology, your ARRMA vehicle is controlled by a wheel and trigger style radio transmitter.
Ideal for new RC users and experienced bashing fans alike. Adjustable steering and throttle trim will allow you to easily tune your control experience to suit your individual needs.
IC5 connectors can handle the power required when the action gets furious. They provide a reliable connection between your ESC and your chosen battery packs.
Fully waterproof ESC, steering servo and radio receiver box are standard. This means that hitting the roughest terrains, in the most extreme conditions, will be no problem. Rain, mud, snow, dirt and anything else you want to bash your way through.
ARRMA waterproof electronics are ready for action.
* For details on waterproof standards, please refer to the product instruction manuals
Designed to be FAST, designed to be TOUGH. ARRMA want to provide our customers with an unforgettable RC experience that will blow you away.
Just add a 3S LiPo battery to your model and you are ready to blast past speeds of 50mph. No additional parts required!
A high-quality 2.4Ghz radio transmitter and receiver, wheels and high-performance dBoots tires, waterproof ESC and steering servo and a pre-painted bodyshell are all included, as standard.
Please check the vehicle specifications for exact details of what is included in the box and what is required to get your ARRMA vehicle running.
ARRMA will support your investment for two years. With our impressive limited warranty helping to keep you running for longer.
Visit our Support page to learn more about this great feature.