The TYPHON 4X4 3S BLX Speed Buggy will provide unrivalled traction on any surface, blasting though your chosen environment, as you carve the landscape with the ground-thrashing motion of full-time 4WD.
Don't just bash, BLAST. With abundant power from the BLX100 3S brushless power system on tap, and a superbly set-up chassis, you are assured to have amazing fun with the TYPHON 4X4 3S BLX.
Standing out from the crowd is easy when you pilot the TYPHON 4X4 3S BLX. A detailed pre-painted body shell provides protection against the elements. Universal-joint telescopic driveshafts, and durable composite suspension arms and hubs make your journey into wild locations even easier.
Designed to be TOUGH. ARRMA have redefined the proven ARRMA 4X4 3S BLX platform to create this 1/8th Scale Speed Buggy.
High-strength hook-and-loop straps are used to keep your batteries in place.
With track-inspired handling and tough, bashing build quality, your TYPHON 4X4 3S BLX Speed Buggy will put you in control of exhilarating RC driving action, straight from the box. Rip-up your local dirt bowl, blast across the mall parking lot or launch huge jumps at the skate park. The TYPHON 4X4 3S BLX can do it all.
Built to soak up the most intense all-weather thrills and spills, the TYPHON 4X4 3S BLX is pumped full of high-quality ARRMA design features, meaning you can conquer anything in your path, and enjoy head-turning Speed Buggy looks.
Precision aluminum, tough steel and composite materials, all combined in an easy-to-maintain vehicle design that is built for action, straight from the box.
A sculpted rear wing provides high-downforce at speed, keeping you grounded at speeds of over 50mph.
Easy-access Power Module assembly can be taken out in seconds, with the removal of just one screw. The center shaft assembly is telescopic to assist with easy disassembly and is sprung-loaded to ensure it stays in position during use.
Easy-access Electronics Module assembly can be taken out with the removal of only five screws. The module offers quick and easy access to the servo, electronic speed controller (ESC) and receiver.
The two-piece moulding comprises a lower box and upper lid that are sealed with high-quality rubber seals. The ESC and steering servo are attached to this moulding, whilst the receiver sits inside the waterproof box.
Both the front and rear diff modules are easy to access in the TYPHON 4x4 3S BLX, ensuring that you spend more time bashing and less time in the workshop.
High quality dBoots 2-HO tires, coupled with black multi-spoke wheels, offer high bite on a multitude of surfaces. The multi-spoke wheels feature standard 1/8th scale buggy dimensions with 17mm hex size.
With the Power Module removed from the vehicle the slipper clutch can be accessed with the removal of three screws. The triple plate slipper clutch in the 3S models features a 0.8 module spur gear making it super-durable in extreme conditions.
These differentials are TOUGH. The main differential gears have been super-sized with large pitch gears that have been designed to withstand huge torques, allowing lightweight composite material to be used for reduced rotating mass without compromising strength. The differential internals feature full-metal straight-cut gears, ensuring trouble-free operation.
The BLX100 100A waterproof ESC provides consistent power control and is 3S LiPo ready.
Fitted with a reliable IC5 battery connector and sporting a built-in cooling fan for reduced heat during intense driving action, the BLX100 ESC has over-voltage protection, and a two-stage LiPo cut-off for added cell management.
The fitted 12AWG high-quality wires and 6.0V BEC unit are combined with a three-mode throttle profile (FWD/REVERSE/BRAKE) to provide the ultimate driving experience.
The BLX 3660 3200kV brushless motor provides both speed and torque and is perfectly balanced for use with our BLX100 ESC unit and 3S LiPo batteries.
A beautifully etched black aluminum motor can provides a premium look, whilst a four-pole internal configuration keeps the power supply smooth and consistent.
Gold bullet connectors allow fast and easy wire removal when you need to clean your vehicle.
An aluminum motor heatsink is fitted to the BLX 3660 motor, as standard. The heatsink features large fins and a flat area that has been designed to enable a fan to be mounted if further motor cooling is required.
Finished in a matte black colour, it is etched with a cool ARRMA logo.
Strong and durable, the waterproof ADS-7M Metal Geared Steering Servo provides fast and reliable control.
The ADS-7M has all-metal gears for increased strength and long-lasting durability. The 40mm x 38mm x 20mm case size is industry standard, so the ADS-7M can also be fitted in other RC vehicles. Operating at 6 kg-cm/6.5 kg-cm 6V/7.2V (83oz-inch/90oz-inch), this tough steering servo can reach full articulation in 0.14 sec/0.12 sec 6V/7.2V.
The Spektrum STX2 radio system offers fast and consistent control for your ARRMA vehicle. Using 2.4Ghz technology, your ARRMA vehicle is controlled by a wheel and trigger style radio transmitter.
Ideal for new RC users and experienced bashing fans alike. Adjustable steering and throttle trim will allow you to easily tune your control experience to suit your individual needs.
IC5 connectors can handle the power required when the action gets furious. They provide a reliable connection between your ESC and your chosen battery packs.
Designed to be FAST, designed to be TOUGH. ARRMA want to provide our customers with an unforgettable RC experience that will blow you away.
Just add a 3S LiPo battery to your model and you are ready to blast past speeds of 50mph. No additional parts required!
Fully waterproof ESC, steering servo and radio receiver box are standard. This means that hitting the roughest terrains, in the most extreme conditions, will be no problem. Rain, mud, snow, dirt and anything else you want to bash your way through.
The included waterproof electronics are ready for action.
* For details on waterproof standards, please refer to the product instruction manuals
A high-quality 2.4Ghz radio transmitter and receiver, wheels and high-performance dBoots® tires, waterproof ESC and steering servo and a pre-painted bodyshell are all included, as standard.
Please check the vehicle specifications for exact details of what is included in the box and what is required to get your ARRMA® vehicle running.
ARRMA® will support your investment for two years. With our impressive, limited warranty helping to keep you running for longer.
Visit our Support page to learn more about this great feature.