TYPHON BLX Radio Controlled Car
The TYPHON 6S Speed Buggy is the ultimate performance 4WD bashing machine. Capable of tackling the most challenging conditions, from your local race track to a mud drenched bashing spot, the TYPHON 6S is packed with high-power features to blast you into new realms of RC fun.
MAX SPEED POSSIBLE
60+mph / 96+km/h
Horizon Hobby Saleable Part #
HOBBICO SALEABLE PART #
BUILD CONFIGURATION OPTIONS
310mm / 12.2"
306mm / 12.05"
NUMBER OF DIFFERENTIALS
WEIGHT (NO BATTERY)
3.27kg / 7lbs 3oz
4S or 6S Lipo (Hard or soft-case) within dimensions specified
2 Year Limited
Image 1 of 25
Styled to turn heads, from the local bashing spot to the club race track, the TYPHON 6S looks serious, straight from the box.
Image 2 of 25
Unleashing the equipped BLX brushless system will allow you to master 6S LiPo battery power on a wide range of extreme surfaces. The TYPHON 6S is ready for action.
Image 3 of 25
A low-profile Polycarbonate body shell, and race-inspired multi-spoke black nylon wheels, are combined with a high-downforce rear wing for refined performance in the most extreme driving environments.
Image 4 of 25
With track-inspired handling and super-tough bashing build quality, your TYPHON 6S will put you in control of exhilarating RC driving action, straight from the box. Rip up your local dirt bowl, blast across the mall parking lot, launch huge jumps at the skate park. The TYPHON 6S can do it all.
Image 5 of 25
Big bore red anodized aluminum shocks provide a plush driving experience, even on the roughest terrains.
Image 6 of 25
Triple diff equipped and ready to command the roughest environments, from the first time you pull the trigger, you will understand what BLX brushless power is designed to do. More power, more speed, more excitement. You control how it happens.
Image 7 of 25
Fully loaded with premium waterproof electronics, the TYPHON 6S is ready to challenge high-speed parking lot runs, then blast through the mud, dirt, water and snow at your local bashing spot.
The TYPHON 6S is built around a black anodized aluminum chassis plate, giving this BLX brushless powered bashing machine a strong and durable platform for ultimate performance.
Image 8 of 25
Black anodized front and rear shock towers provide reduced weight and increased durability, the perfect combination when you unleash the 6S LiPo capability of this super-tough 1/8 4WD electric speed buggy.
Equipped with triple oil-filled diff units, front, middle and rear, hammering the throttle and getting the power down in all conditions is effortless and consistent. All metal diff gears provide long-lasting durability and soak up the punishment as you bash hard.
Image 9 of 25
Standing out from the crowd is easy when you pilot the TYPHON 6S. A super-detailed and pre-painted body shell provides increased protection against the elements. Steel driveshafts and super-durable composite suspension arms and hubs make your journey into wild locations even easier.
Image 10 of 25
A pillow ball suspension set-up keeps the TYPHON 6S handling super-smooth, no matter what you throw at it.
Image 11 of 25
A strengthened rear wing mount provides added durability, meaning you can hit the biggest jumps and fly like a bashing Pro, time after time. The included steel anti-roll bars allow the TYPHON 6S to handle like a premium race vehicle, whilst providing an advanced tuning option as your experience grows.
Image 12 of 25
Equipped with an adjustable battery tray, your chosen battery cell position can be adjusted, changing the weight balance of the TYPHON 6S for specific driving styles. Secured with super-strong hook and loop straps, hassle-free battery cell changes are performed in seconds.
Ultra-strong composite chassis side pods provide increased protection from dirt and water ingress when the bashing action gets extreme.
Image 13 of 25
Aggressive and hard-wearing dBoots all-terrain tires are mounted on strong black nylon wheels, giving you the traction you need to put the BLX brushless power straight into your chosen surface. 17mm wheel hex fittings allow the use of a wide range of third party wheel and tire combinations, meaning you can switch your rubber if you choose to go and hit the local race track.
Image 14 of 25
The included BLX185 150A waterproof ESC provides consistent power control and is 6S LiPo ready.
Fitted with reliable XT90 connectors and sporting a built-in cooling fan for reduced heat during intense driving action, the BLX185 ESC has over-voltage protection, and a two-stage LiPo cut off for added cell management.
The fitted 10AWG high-quality wires and 6V BEC unit are combined with a three-mode throttle profile (FWD/REVERSE/BRAKE) to provide the ultimate driving experience.
Recommended battery specification: 5000mAh - 35C minimum - per battery pack
Image 15 of 25
The BLX 2050kV brushless motor provides speed and torque and is perfectly balanced for use with the BLX185 ESC unit.
A beautifully etched black aluminum motor can provides a premium look, whilst a four-pole internal configuration keeps the power supply smooth and consistent.
Gold bullet connectors allow fast and easy wire removal when you need to clean your vehicle.
The aluminum motor can offers increased heat dissipation from the finned body section.
A dual motor shaft flat section provides safe and secure pinion gear fit.
Image 16 of 25
The TTX300 radio system offers fast and consistent control for your ARRMA vehicle. Using 2.4Ghz technology, your ARRMA vehicle is controlled by a wheel and trigger style radio transmitter.
Ideal for new RC users and experienced bashing fans alike. Adjustable steering and throttle trim will allow you to easily tune your control experience to suit your individual needs.
Image 17 of 25
Equipped with three metal-geared differential units, as standard, ARRMA understand the importance of durability and control. Easy-access front and rear diff units will allow you to carry-out maintenance in minutes. This means you spend less time wrenching, so you can have more time bashing.
Image 18 of 25
The ARRMA radio box is fully waterproof and dustproof. Designed to keep your 2.4Ghz reciever safe, no matter how much dirt and water you blast through.
Image 19 of 25
The ADS-15M steering servo benefits from metal gears and is fully waterproof.
To provide fast and consistent steering response, the ADS-15M has 208oz-inch (15kg-cm) of torque at 7.2v.
At 1.6 x 0.8 x 1.5" (41 x 20 x 38mm) in size, this high-power steering servo is compact and highly capable.
Image 20 of 25
A high-quality 2.4Ghz radio transmitter and receiver, wheels and high-performance dBoots tires, waterproof ESC and steering servo and a pre-painted bodyshell are all included, as standard.
Please check the vehicle specifications for exact details of what is included in the box and what is required to get your ARRMA vehicle running.
Image 21 of 25
Fully waterproof ESC, steering servo and radio receiver box are standard. This means that hitting the roughest terrains, in the most extreme conditions, will be no problem. Rain, mud, snow, dirt and anything else you want to bash your way through.
ARRMA waterproof electronics are ready for action.
* For details on waterproof standards, please refer to the product instruction manuals
Image 22 of 25
ARRMA will support your investment for two years. With our impressive limited warranty helping to keep you running for longer.
Visit our Support page to learn more about this great feature.
Image 23 of 25
Designed to be FAST, designed to be TOUGH. ARRMA want you to progress your RC experience by accessing more power, resulting in faster performance.
With an easy-to-access upgrade path, you can increase the inbuilt potential of your ARRMA vehicle as your skills develop; increasing your performance has never been easier. Follow our dedicated Speed Card information to better understand how you can keep getting faster.
Image 24 of 25
Learn the path to ultimate BLX brushless performance. Push harder and blast beyond previous limits.